gear set

英 [ɡɪə(r) set] 美 [ɡɪr set]

网络  齿轮组; 套装; 套装和外观; 齿轮组或行星排; 形齿轮组

化学



双语例句

  1. Because of their ability to reduce friction and wear, they are usually used as the material for making the worm wheel in a worm gear set.
    由于具备减摩性和耐磨性的性能,它们通常用来制作涡轮减速器中的涡轮。
  2. This paper analyses the kinematics of simple planet gear set, speculate the transform mechanism and method of positive and minus planet gear set.
    通过分析简单行星排的运动学,推导出了正、负号行星排基本构件相互转换的原理和方法。
  3. Likewised, should the mechanical shaft seal assembly require replacement, the gear set dose not have to be removed from the pump.
    同样地,机械密封轴部件取代,不需要从泵体上移除。
  4. At the end of the article the author says that the service life of slush pump gear set can be elongated by a correct usage and timely replacement of lubricating oil and lubricating methods.
    正确地使用和及时更换润滑油,完善润滑方式,可以显著提高钻井泵齿轮副的寿命。
  5. Some cars have variable-ratio steering, which uses a rack-and-pinion gear set that has a different tooth pitch ( number of teeth per inch) in the center than it has on the outside.
    有些车的转向系角传动比是可变的,这种转向器采用齿轮齿条式,它在中间而不是外部,有不同的齿密度(每寸齿数)。
  6. Analysis of Static Load Sharing in a Planetary Gear Set with Gap for Gear Floating
    基于间隙浮动的行星齿轮传动系统静力学均载分析
  7. Multi-deformable-body dynamics analysis on the ring gear of planetary gear set
    行星齿轮内齿圈的多柔体动力学分析
  8. The step speed regulating mechanism and the stepless speed regulating mechanism are separately matched with the speed regulating gear set and the differential gear train of the transmission system.
    有级调速机构、无机调速机构分别与传动系统中的调速齿轮组和差动轮系匹配。
  9. A rack-and-pinion gear set is enclosed in a metal tube, with each end of the rack protruding from the tube.
    整个齿轮齿条式转向器装载金属壳内,其齿条从转向器伸出来与转向摇臂连接。
  10. Without disturbing the piping, the gear set and strainer screen can be serviced.
    在不受管子的影响下,齿轮设置和过滤网能被检修。
  11. At the heart of BMW ′ s Active Steering system is the planetary gear set incorporated into the steering column.
    BMW主动转向系统的核心是内置在方向盘传动轴上的一个行星装置。
  12. Ordered that all soldiers in the field gear set in the playground, I will to explain this rare phenomenon;
    命令所有的士兵着野战服在操场上集合,我将向他们解释这一罕见的现象;
  13. A small switching gear, a contrate gear shaft respectively fixedly connected with a big chain wheel and a big gear, a speed change gear set and a generator set are arranged in the casing.
    外壳内,设有小切换齿轮、分别与大链轮和大齿轮固连的端面齿轮轴、变速齿轮组和发电机组。
  14. Taking the multi-deformable-body dynamics theory as a foundation, the dynamics behaviors of ring gear of the planetary gear set were studied in the process of engagement.
    以多柔体动力学理论为基础,研究了行星齿轮内齿圈在啮合过程中的动力学行为。
  15. Twin-input single-output gear bevel pinion and bevel gear set
    双主动齿轮单出轴齿轮
  16. The basic planetary gear set consists of a sun gear, a ring gear and two or more planet gears, all remaining in constant mesh.
    通常,行星齿轮系统包含太阳轮,齿圈和两个或两个以上行星轮,所有齿轮都始终处于啮合状态。
  17. Actuation – can be supplied with a hammerblow handwheel, manual gear set, electric motor operator, pneumatic Globe valve calss300Lb or hydraulic cylinder operator.
    执行机构–这些阀门可以配置打击手轮,手动齿轮装置,电动执行机构、液动或气动执行机构。
  18. The paper analyzed the deflection of a compound planetary gear set and calculated the damage percentage of its roller bearing.
    针对某行星变速机构复合排行星齿轮和滚针轴承进行了受力变形分析和损伤率计算。
  19. The author pays great attention to analysing the influence of the property of lubricating oil and the lubricating methods on the service life of the slush pump gear set and offers some suggestions about the improvement on the lubricating methods.
    笔者着重分析了润滑油性质和润滑方式对钻井泵齿轮副寿命的影响,并提出了改进钻井泵润滑的若干建议。
  20. Initial study has been done, such as design and machining of gear set, selection of meshing medium, calculation for the transmission and so on.
    作为国家自然科学基金的一项基础研究项目,已经在带式啮合介质齿轮副的设计、介质带材料的初步选择、齿轮传动的计算等方面进行了初步的探索。
  21. The Process Research of the Simultaneous Inter-rubbing Method for Complex Wheel Teeth Gear Set
    复合轮齿压缩机原理及热力学特性分析复合轮齿齿轮副同步互研法工艺研究
  22. Detailed calculation and analysis on differential planetary gear set ( PGS) are performed, and a general method for calculating conversion ratio ( a key feature parameter) of PGS is defined.
    对差动行星齿轮动力分配装置进行了详细的计算分析,确定了分析计算行星排特征参数p的一般方法。
  23. Edge-face engage of spiral gear set group A: nonoperative control;
    螺旋齿轮副的棱-面啮合B组为异系移植组;
  24. The proper selection of gear lubrication oil has an important function to reduce the wear of the gears and to prolong the gear set's life.
    正确选用齿轮润滑油对于减少齿轮磨损、延长机组寿命具有重要的作用。
  25. This principle was that both hydraulic and mechanical steering power streams were separately transferred by hydro-mechanic transmissions in the positive independent dual-stream transmission system, and combined by steering planetary gear set, transferred to the power summing planetary gear set.
    该原理是在正独立式双流传动系统中,两侧设有液压和机械传动机构,分别传递转向液压功率流和转向机械功率流,两股功率流经过转向行星排汇合后输出给汇流行星排。
  26. The experiments of the tooth root stress and noise testing have proved that the method is efficient for designing the high contact ratio gear set, and has some advantages of dynamic behavior and strength.
    通过切齿、齿根应力测试、噪声测量等对比实验,验证了高重合度弧齿锥齿轮设计方法的可行性,证明了这种齿轮在动态性能与强度性能方面均有优越之处。
  27. Active steering is realized with a planetary gear set and an angle assist motor.
    本文在电动助力转向机构的基础上,设计了新型的主动前轮转向系统结构,通过一套行星齿轮机构与助转角电机实现主动前轮转向。
  28. The test results validate that the approach based on grey probability relational analysis is effective in degradation state recognition for sun gear root crack of planetary gear set. 4.
    实验验证结果证实了基于灰色概率关联分析的方法对行星轮系太阳轮齿根裂纹退化状态识别的有效性。
  29. In the mill shaft coupling, its external gear set also often uses the circular arc drum-shaped gear.
    例如,在轧钢机联轴器中,其外齿套往往采用圆弧鼓形齿轮。
  30. The research situation of axial force of planetary gear in planetary gear set and lubrication characteristics of its thrust washer were summarized.
    对行星排行星轮轴向力与止推垫圈润滑特性的研究现状进行了总结,为本文开展研究指明了方向。